ESecure ES00M140 Manual do Utilizador

1 H.264 DVR Quick Start Guide Version 1.a Model: ES00M140, ES00M180 1 Introduction ...

10 schedule-triggered recoding at lunch time (that means no recording will be performed unless an alarm event happens), night time being set to moti

11 —> 【Search】Use the Quick click button and enter the time period you want to search using the virtual keypad, then click the search button

12 Note: The recording mode set to both “Regular” and “Detect”. If you want to playback “Regular”, you must select file type to be “All”, not genera

13 【Media Port】Transfers video data between client and device, default is 34567 【Web Port】Sets up the port of IE browser via HTTP，default is 80

14 After you login, you will see the following screen. Click the Ok button If you want to exit at this point, please select the Logout butto

15 (3) Click “Customization level” to enter into the security Setting Set the ActiveX control and pluggable unit. Select the following option

16 Step 4: Double click “Internet protocol (TCP/IP)”. Step 5: Examine the IP address, subnet mask, and default gateway on the PC. Step 6: S

2 1. Introduction 1.1 Safety Information • Before setting up the DVR, carefully read all the documentation that came with your package. • To preve

3 installation. Please connect the power cable to the appropriate socket, and the data cables to their corresponding connectors. 1.

4 1.5 Rear panel 4CH8CH (1) Video inputs (2) BNC outputs (3) Audio input (4) Audio output (5) USB (6) Network (7) Power su

5 Getting Started and Main Menu 2. Basic operation 2.1 Login System In preview mode you can right click the mouse to get a desktop shortcut menu. Ri

6 When the Main Menu appears, click the system icon in the main menu shown below: 2.2.1 System setup Set all the system parameters by clicking eac

7 Click [Language] ---> Select your language from the drop down menu. Then click “OK”.

8 【DST】Click for Daylight Saving Time. Daylight savings time “On” means DST is enabled. You can setup the start time and end time of DST. 2.2.2 F

9 2.2.3 Record The User needs to install and format a HDD, and set all the recording parameters before recording. There are 2 record modes: Schedule